Next: GNU remotecontrol & BACnet, Previous: Scope, Up: Top [Contents]
GNU remotecontrol is designed to substantially reduce the time & effort necessary to remotely manage multiple IP thermostats, while significantly increasing your productivity through its many useful and time saving features. The User Interface is no more difficult than using any other web application involving simple check boxes and pull-down menus. GNU remotecontrol, combined with the Remote Monitoring Server, work together as a complete HVAC Energy Management system. GNU remotecontrol more than pays for itself by saving time/effort in manual labor for managing all resources individually.....and then some.
It is necessary to understand the design and usage intent of the HVAC thermostat to fully grasp the design and usage intent of GNU remotecontrol.
The HVAC thermostat is often a combination of either a relay or a semiconductor device to have circuits either opened or closed, to switch the device either off or on. Examples of this include heating, cooling, or a fan. The addition of a scheduling option to turn any of these items off or on at a certain date/time does make it more practical of a device in terms of managing day-to-day operation of a HVAC system. Adding in the ability to track run time duration for heating, cooling, or a fan help energy efficiency measurements. The final addition of remote access, through the traditional IP enabled data network, takes the HVAC thermostat to an interconnected device capable of multiple read/write operating functions. The cable from the thermostat to the HVAC equipment is solid core 18-AWG, either 4 or 8 separately jacketed wires, depending on system capability, all contained within a protective jacket.
GNU remotecontrol is here to help you make your Energy Management strategy easier and more productive. GNU remotecontrol is here to help simplify your life, not make it more complicated. Contact the mailing list if you are stuck or cannot figure out the best option for your GNU remotecontrol framework. The chances are the answer you need is something we have already worked through. We would be happy to help you by discussing your situation with you.
You will most likely need to work with others who have a different skill set than you do to develop and implement an effective Energy Management strategy. It is necessary to carefully plan for your selection of the decision makers you choose to work with. Choosing decision makers that are capable to run your HVAC and IT systems is paramount to the success of your system performance.
Being a licensed Professional Engineer does not make that person a Certified Energy Manager (CEM). They are separate qualifications, each with their own requirements. Go with a Certified Energy Manager to help you determine if you qualify for any tax benefit for commercial building being rated as energy efficient. Even if you don’t qualify for a tax benefit, it is highly likely you will find a very beneficial set of methods to increase your Energy Management strategies that makes paying the Certified Energy Manger well worth the expense.
Serving in an IT role does not necessarily make one qualified do an end-to-end design of an IT system. Relevant certifications help to know if one is really capable to do what they say they can do. Experience is probably the strongest credential one can have for being capable to run an IT system. Simply put, operation does not equal design. They are separate qualifications, each with their own requirements.
Look to your Cost Benefit Analysis for decision making on how you need to design and operate your Energy Management strategy.
The following is a list of links to information that will greatly help you plan for the network implementation and configuration of your Energy Management strategy.
SCADA speaks to the industrial side of HVAC automation.
ICS speaks to industrial production facilities.
SANS specializes in Internet Security training.
This code was originally called JUT.....“Just Use This” to represent the intention of this software automation to take the complicated and make it very, very simple, from a user perspective. The name changed to GNU remotecontrol, when code was released under the GNU license.
If you have IP thermostats, you know that it takes time/effort to keep your energy usage down and control your climate for your comfort. This time and effort is increased with each remote device or HVAC unit that you want to administrate. GNU remotecontrol helps you spend less time/effort administrating your IP thermostats, provides automated record keeping of what changed, who changed it, and when it was changed. GNU remotecontrol deployment helps keep your energy usage as low as possible.
Review the access logs you have enabled for your Web Server, your Operating System, and all of the other technologies that achieve user validation of a web application. Technologies that are time tested, tried and true, that you can count on. No need to reinvent the wheel, use what works very well when possible.
Free up your time/effort for starters. Also, enable you to know who did what to your IP thermostats when GNU remotecontrol was used to change your IP thermostats. Finally, your GNU remotecontrol application can help you minimize your energy costs.
The IP thermostat will very much help with that measurement.
Pretty easy, actually. Select the IP thermostats you want to change the settings of.....make the change.....and that’s it. You can easily see the time/effort you save changing the air conditioning from 75°F to 73°F for several IP thermostats, all at once! Then, imagine changing your setback schedule somehow on top of that, for say 30 different IP thermostats, all at once!
Oh, yes. Think of GNU remotecontrol as writing to your IP thermostats, and Remote Monitoring Server reading information about your IP thermostats. The two go hand in hand. They are intended to work together.
Yes. Use your Remote Monitoring Server to collect information about the weather from International Weather Services for the location of your IP thermostat. That will tell you a great deal about the quality of your Energy Management strategy.
Yes, you can access GNU remotecontrol using your cell phone Internet browser.
No. GNU remotecontrol is a WC3 compliant web application. More times than not, your network is ready to go as-is.
You can set up different user accounts, but the nature of an IP thermostat means the people touching it be very clear with each other as to how they want to set the IP thermostat.
We recommend you use a High Grade (AES-256 bit) encryption to secure the connection from your computer to your GNU remotecontrol server and verify the identity of your server with your own signed SSL Certificate. The connection from your computer to your IP thermostat is not changed from your normal connection to your Proliphix IP thermostat.
Yes. See GNU remotecontrol & BACnet.
Yes. Remote Monitoring Server & GNU remotecontrol work together to help you do just this. Recorded data of your HVAC system’s usage and outdoor weather information is priceless for testing & balancing. The review of recorded data offers considerable cost savings, in both time and effort, when optimizing your system setup. Additionally, you can reduce the number of people necessary to do the testing and balancing down to 1 person.
The next logical step is to expand GNU remotecontrol and become certified with industrial HVAC, lighting control, access control, and fire detection technologies. The BACnet communication protocol is an excellent candidate for connection to the GNU remotecontrol framework. See GNU remotecontrol & BACnet. The MODBUS communication protocol may also be implemented at a future date, but demand for this capability enhancement is not clearly understood.
Next: GNU remotecontrol & BACnet, Previous: Scope, Up: Top [Contents]